ELECTROMAGNETIC FLOW METER
เครื่องวัดอัตราการไหล ความแม่นยำสูง
เครื่องวัดอัตราการไหล ความแม่นยำสูง
2
FLOW METER เครื่องวัดอัตราการไหล
แบบ ELECTROMAGNETIC
ELECTROMAGNETIC FLOW METERS - FLONET FF 10XX.1
(compact and remote version)
แบบ ELECTROMAGNETIC
ELECTROMAGNETIC FLOW METERS - FLONET FF 10XX.1
(compact and remote version)
DN10-DN100, flow rate 0.028 – 280 m³/h
เครื่องวัดอัตราการไหล (flow meter) แบบ electromagnetic
ใช้วัดอัตราการไหลของของเหลวที่นำไฟฟ้าสามารถใช้ในกระบวน
การผลิตอาหารอุตสาหกรรมเคมี ถูกสุขอนามัย (hygienic suitability)
ความแม่นยำสูงมากเสถียรภาพในการทำงานสูง วัดได้ 2 ทิศทาง
ลักษณะการไหลของของไหล ไม่มีผลในการวัด (10 to 100mm, PN10, flow rate 0.028 – 280 m³/h, acc: ±0.5% for flow rates 5 to 100% qs)
ใช้วัดอัตราการไหลของของเหลวที่นำไฟฟ้าสามารถใช้ในกระบวน
การผลิตอาหารอุตสาหกรรมเคมี ถูกสุขอนามัย (hygienic suitability)
ความแม่นยำสูงมากเสถียรภาพในการทำงานสูง วัดได้ 2 ทิศทาง
ลักษณะการไหลของของไหล ไม่มีผลในการวัด (10 to 100mm, PN10, flow rate 0.028 – 280 m³/h, acc: ±0.5% for flow rates 5 to 100% qs)
ข้อมูลทางเทคนิค :
usage
measurement of conductive liquids
rated internal diameter
10 to 100mm, or 1/2" to 2 1/2" (Clamp)
rated pressure PN
10
min. conductivity of measured fluid
20μS/cm, on special requirement 5μS/cm
max. temperature of measured fluid
+150°C
electrode material
Hastelloy-C4 on special requirement platinum, tantalum or titanium
sensor lining
PTFE
connections
Clamp (ITE Intertechnik DIN 32676),
Tri Clamp (Tri Clover) screw fittings for food-processing applications (DIN 11851)
Tri Clamp (Tri Clover) screw fittings for food-processing applications (DIN 11851)
design version
compact or remote
measurement accuracy
±0.5% for flow rates 5 to 100% qs
measurement range
0.1 to 10m/s
signal and communication outputs
(0) 4 to 20mA ~ (0 to qs)
frequency output 0 to 1.000Hz ~ (0 to qs )
pulse output 0.1 to 1.00l/imp ~ (0 to qs )
communication interfaces RS 232 and RS 485
frequency output 0 to 1.000Hz ~ (0 to qs )
pulse output 0.1 to 1.00l/imp ~ (0 to qs )
communication interfaces RS 232 and RS 485
power source
24 / 115 / 230V AC +10 - 15%, 50 to 60Hz,
24V DC +10 - 15%
24V DC +10 - 15%
ambient temperature
-5°C to +55°C
protection class
IP67 / IP68 (sensor in remote version)

2
FLOW METER ELECTROMAGNETIC FLOW METERS
ELECTROMAGNETIC FLOW METERS - FLONET FF 10XX.1
(compact and remote version)
ELECTROMAGNETIC FLOW METERS - FLONET FF 10XX.1
(compact and remote version)
Induction flow meters of the type series FLONET FF10XX.1
are intended for professional flow-rate measurements of electrically conductive fluids in the food-processing and chemical industries. The meters meet most demanding requirements regarding measurement accuracy, long-term parameter stability and hygienic suitability. Flow-rate measurements in both directions are possible.
The flow sensor doesn´t have any effect on the fluid flow characteristic or pressure in the connecting piping is negligible. The associated electronic unit supplies power to the sensor
unit and processes the flow-rate signals.
The meters also have a dosing-control function, performs internal diagnostics and make possible selection of physical units for the quantities displayed. The meters have frequency, pulse and current outputs, and can be connected to external electronic devices via the RS 232 or RS 485 communication lines.
are intended for professional flow-rate measurements of electrically conductive fluids in the food-processing and chemical industries. The meters meet most demanding requirements regarding measurement accuracy, long-term parameter stability and hygienic suitability. Flow-rate measurements in both directions are possible.
The flow sensor doesn´t have any effect on the fluid flow characteristic or pressure in the connecting piping is negligible. The associated electronic unit supplies power to the sensor
unit and processes the flow-rate signals.
The meters also have a dosing-control function, performs internal diagnostics and make possible selection of physical units for the quantities displayed. The meters have frequency, pulse and current outputs, and can be connected to external electronic devices via the RS 232 or RS 485 communication lines.
Technical parameters :
usage
measurement of conductive liquids
rated internal diameter
10 to 100mm, or 1/2" to 2 1/2" (Clamp)
rated pressure PN
10
min. conductivity of measured fluid
20μS/cm, on special requirement 5μS/cm
max. temperature of measured fluid
+150°C
electrode material
Hastelloy-C4 on special requirement platinum, tantalum or titanium
sensor lining
PTFE
connections
Clamp (ITE Intertechnik DIN 32676),
Tri Clamp (Tri Clover) screw fittings for food-processing applications (DIN 11851)
Tri Clamp (Tri Clover) screw fittings for food-processing applications (DIN 11851)
design version
compact or remote
measurement accuracy
±0.5% for flow rates 5 to 100% qs
measurement range
0.1 to 10m/s
signal and communication outputs
(0) 4 to 20mA ~ (0 to qs)
frequency output 0 to 1.000Hz ~ (0 to qs )
pulse output 0.1 to 1.00l/imp ~ (0 to qs )
communication interfaces RS 232 and RS 485
frequency output 0 to 1.000Hz ~ (0 to qs )
pulse output 0.1 to 1.00l/imp ~ (0 to qs )
communication interfaces RS 232 and RS 485
power source
24 / 115 / 230V AC +10 - 15%, 50 to 60Hz,
24V DC +10 - 15%
24V DC +10 - 15%
ambient temperature
-5°C to +55°C
protection class
IP67 / IP68 (sensor in remote version)